Download - Danmeter ApS

Go to content

Main menu:

CSM Link Software - Download

CSM Link Software 3.22 Download

It is recommended that the latest version of Microsoft .NET Framework is installed using Windows Update before installation.
On computers without Microsoft .NET Framework v2
Download and run the "setup.exe" to install the CSM Link Software 3.22 on computers with Windows XP
DOWNLOAD (32,4MB)
On computers where Microsoft .NET Framework has already been installed.
Download and run the "setup_without_dotnet.exe" to install the CSM Link Software 3.22
DOWNLOAD (9,1MB)

Compatibility

    • CSM Link™ firmware version 2.000.001 or higher is required.
    • Full utilization of the CSM Link Software v3.22 features requires CSM Monitor™ firmware version 2.000.004 or higher.
    • Imports all previous CSM Case files (*.CSV files) created with CSM Capture and CSM Link Software™ and converts to the new CSM file format.
    • Previous versions of CSM Link Software must be uninstalled before installation of CSM Link Software v3.22
    • When uninstalling previous version of CSM Link Software the settings and stored CSM Files are not deleted and will be avaliable for use with CSM Link Software v3.22.
    • CSM Link Software is developed for Windows XP

    Updated USB driver compatible with  Vista and Windows 7

    This driver enables the  CSM Link Software to be installed on computers running Windows Vista and Windows 7/8/10.
    Download download and run the "CP210x_VCP_Win_XP_S2K3_Vista_7.exe" to install updated driver for USB.
    Install the driver before the CSM Link is attached.
    DOWNLOAD (6,7MB)

    Installation of CSM Link Software under Vista and Windows 7/8/10

    Verify that .NET is installed and updated on the computer used for the installation.
    CSM Link Software has been testet with .NET version 1.1 installed on Windows 10.
    Make sure that the updated USB driver is installed before installation of CSM Link Software.
    Right click on the exe file and select "Run as administrator" to install CSM Link Software v3.22. Use the setup file without .NET.
    When the installation is complete open the Start menu and locate the CSM Link Software. Right clik on the item and select Properties. Go to the compatibility page and check the option to run as administrator.
    A warning is displayed on every start of the software.
    Once started the CSM Link Software will function as intended.
    Back to content | Back to main menu